Synthetic Brake Fluid – DOT 4
Protects brake system — for DOT3 and DOT4, ABS, Disc or Drum Brakes.
Take Note!
Always follow vehicle manufacturer’s recommendation.
- Optimum performance
- Prevents corrosion
- Protects
Product Description
STP® Synthetic Brake Fluid DOT4 is scientifically engineered for optimum performance for ABS, disc or drum brake systems in today’s cars and trucks.
How it helps:
- Provide protection against brake failure from vapour lock
- Prevent corrosion in brake systems
- For DOT3 & DOT4 ABS, Disc and Drum Systems*
- Minimum wet boiling point 155°C
Meets and exceeds U.S. FMVSS NO.116 DOT 3 & DOT 4, SAE J1703,SAE J1704 AND ISO 4925 (CLASSES 3 & 4).
*always follow vehicle manufacturer’s recommendations
Take Note!
Always follow vehicle manufacturer’s recommendation.
Usage Directions
Clean all dirt from around cover on master cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check fluid level once a month.
TO BLEED SYSTEM: Refer to service manual. Do not reuse brake fluid from bleeding operation.
Usage Frequency: Use as required.
